Empowering The Bicycle Traveler

A Conversion: Drop Bar to Albatross Handlebar

Switching from drop style handlebars to an upright, swept back handlebar can change the functionality and personality of a bicycle. And sometimes a change can be good, maybe turning an unused bike, or one that may duplicate another bike in one’s stable of bikes, into the go to, everyday machine.
From This:

To This:

oxford handlebarsOne such handlebar, the Nitto Albatross is popular in both the alloy and chrome-moly versions. Soma Fabrications makes the Oxford bar which is almost identical in size and shape to the alloy Albatross Nitto makes. This 6061 polished aluminum handlebar will take bar end shifters, and has a 25.4mm clamp diameter making it versatile for use with most stems.Making the switch takes a little bit of planning and thought:
– First of all, the brake levers that fit on a drop bar will not fit on the new bar so new  “mountain bike” style brake levers with a 22.2mm clamp diameter, like the Shimano BL-R550 – are a requirement. The brake levers come with new cable and housing which will come in handy because the old cable and housing is probably too short.
– If the drop handlebar setup used bar end shifters these can be transferred to the Albatross or Oxford bar. If downtube shifters, then, no worries. If the drop bars had “brifters”, or those brake levers with the shifters built in, then new shift levers are in order. Either the bar end style or a top mount shifter or I suppose even the mountain bike standard trigger shifters could be used.
– The hand grip areas can be wrapped with regular bar tape or a slide on grip can be used with the caveat that the cable and housing for bar end shifters will not clear most standard grips, and the more or less conventional solution is to use cork grips with grooves filed into them for the cable.

Now it’s a simple matter of disconnecting all the brake and shift cables, un-wrapping the handlebars and taking off the brake and shift levers. The old handlebar comes off and the new one goes on. New shift levers (or the old bar end shifters), brake levers and grips go on, the new cable and housing is fit and tightened and adjusted and that’s it except for possibly adjusting the height or angle of the handlebars to the rider’s preference. A threadless stem with a removable face plate makes removing and installing handlebars pretty simple.

bare oxford handlebars installed

The new bars clamped into place

Sun Race shift lever

This top mount shifter is inexpensive but it works great. It is a single lever meant to be used with a rear derailleur, single chainring and no front derailleur. Who needs more than 5 or 8 gears anyway?

silver bar end shifter

Bar end shift levers work too. See how close to the bar the cable is? This calls for a grooved grip….or just a tape wrap.

IRD brand top mount shifters

Another option might be the IRD brand top mount shifters, indexed for use with a 9 speed rear cassette.

4 comments… add one
  • Karen V July 5, 2011, 10:09 pm

    The handlebar swap has been a huge success. I had mixed feelings about the switch because I loved the bike as it was, and along with the bar swap I opted to lose a bunch of gears, but since I will soon have a new road bike (see the Bike Hermit’s Renovelo project!!) it made sense to turn my do-everything bike into my around-town bike. Riding with upright bars has been fun and I enjoy the different vantage point while riding in town. Thanks, Bike Hermit!

    The only possible downside is that my formerly comfortable Brooks B17s is now not so comfortable. I adjusted the tilt and hope that will solve the problem.

    Reply
  • OlyBikes July 24, 2013, 8:54 pm

    I’m glad you recommended the Soma Oxford bar and not the Nitto Albatross bar (as implied by the title of this blog post). The SOMA is compatible with threadless “endcap style” stems which have much wider clamp areas (~40-42mm) than quality “binder-style” quill stems. This matters because the clamp area of the Albatross is narrower and should only be used with quill stems (or, rather, a stem whose clamp is no wider than the clamp area of the bar). Soma’s bar — and at least one from Civia — have wider clamp areas for modern threadless stems.

    I’m not an engineer, but I’d always recommend matching the stem clamp width to the bar — or vice-versa.

    Reply
  • Ander June 8, 2016, 9:01 pm

    Switching from drop handlebar to significantly more upright handlebar might require switching the saddle as well. Especially if the saddle is meant for aggressive riding position.

    Reply
    • Bike Hermit® June 9, 2016, 12:47 pm

      Good point Ander. A more upright position may be more comfortable with a wider saddle.

      Reply

Leave a Comment

Cancel reply